18
2. Plug the charger into a 120-volt wall outlet or if using
the accessory
¿
eld charger, plug into a cigarette lighter
only for Lithium-Polymer batteries (use a 230-volt
European charger for Europe.). When properly plugged
in, all indicator lights should glow red. During the
charging process, the unit will shut off.
2
nce the battery
cable is unplugged from the unit after a full charge,
you will need to turn the unit on again before use.
3. The Lithium-Polymer battery is fully charged within
2 hours. The lights will stay red during the charging
process. The red light will change into a steady green light
when the battery is fully charged (when you disconnect
the charger after
¿
nishing the charge, you will need to
restart the unit).
4. After charging, cover the battery charging receptacles
with the rubber plugs on the transmitter and receiver
collar.
NOTE :
2
nly use Dogtra-approved batteries, chargers, and
accessories for your Dogtra e-collars. When a charger is not
in use, disconnect it from the power source.
8. The handheld transmitter LCD
