Dogtra 1900S HANDSFREE, Owner'S Manual, Page: 14 / 37

14
Changing the HANDSFREE Remote Controller
Stimulation Mode
The default setting for the HANDSFREE Remote
Controller button is the Constant stimulation.
To change the setting to the Pager or Nick stimulation (or
back to Constant stimulation) proceed with the following
steps:
1. Begin with the transmitter turned off.
2. On the handheld transmitter, hold down the
following buttons to code the desired function on the
HANDSFREE Remote Controller.
Constant = Hold down the on/off button and
the Constant
Pager = Hold down the on/off button and the Pager
Nick = Hold down the on/off button and the Nick
Hold down these buttons until you see a rapid blinking
light on the transmitter.
3. Once you see the rapidly blinking light, release the
buttons.
4. Hold down the HANDSFREE Remote Controller button
until the rapidly flashing light on the transmitter and
controller both show a solid light.
5. Release all buttons. The HANDSFREE Remote
Controller should now be coded.