16
4.4 How to Check the Running Belt for Proper Lubrication
1. Disconnect the main power supply.
2. Put the MiniPACER on its side.
3. Feel the back surface of the running belt.
If the surface is slick to the touch, then no further lubrication is needed.
If the surface is dry when touched, apply a suitable silicone lubricant.
We recommend you use a silicone-based spray to lubricate your MiniPACER Treadmill. This can be
purchased from your local sports retailer or hardware store.
5. TROUBLESHOOTING
This treadmill is designed in a way that in the event of an electrical fault, the machine will turn off
automatically to prevent any injuries to the user and to prevent damage to the machine (i.e. motor).
When the treadmill behaves erratically, simply reset the treadmill by turning the power switch off, waiting
for 1 minute then turning the power button back on.
5.1 Alarm Signals
‘E0’: Safety key is not in the position
Put the safety key (magnet) in its position.
No Power
1. Check power outlet (Plug something else into the power outlet to ensure that the power outlet is working
correctly).
2. Check Power Cable (You may need to take it to an electrician).
3. For further problems please contact -