5
Assembly Instructions
Crate Assembly
Unfold the cabin
Lift the two sides of the cabin and make sure that the fabric is in
correct position for the sides to stand up vertically. Pull the detent pin
out of the locking position. The cross bar locking position is located
inside the cabin on the left side looking into it from the front position.
Push the cross bar into this locking position. When doing it the first
time the fabric might need to stretch. Use the thumb to push inside and
lift the cross bar into it at the same time (see image.)
Once the cross bar is in the position push the detent pin back into the
hole. The cabin is now ready to use as foldable crate or car carrier.
Summary of Contents for Novel
Page 19: ...19 Comments ...