DOGA GX-H Series, Instruction Manual, Page: 9 / 32

Instructions manual / GX-H & GXA-H 40 Volts Screwdrivers
9
10. Operation
Functions remain same as GX-G version
10.1 Speed & Soft Start setting (GX-H) (GXS-H) (GXA-H)
Speed Selection:
1) Press the Speed button for 2 seconds to visit to
PROGRAM mode. Then the two LED lights will
display colours depending on the set speed.
2) Select "Reverse" on F/R switch for increasing
speed or select "Forward" on F/R switch for
increasing speed.
3) Press the Speed button and select the target
speed.
The set speed can be recognized by the colors of
two LED as below.
4) Press the Speed button for 2 seconds to go
back to operating (work) mode.
■
Speed display by two LED color (Standard model)
Model
LED
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Button 1th 2nd 3rd 4th 5th 6th 7th 8th 9th
GX150-H
RPM 800 900 1000 1100 1200 1300 1400 1500 1700
GX220-H
RPM 600 650 700 750 800 900 1000 1100 1200
GX450-H
RPM 300 340 380 410 450 490 530 560 600
GXA150-H
RPM 800 900 1000 1100 1200 1300 1400 1500 1700
GXA220-H RPM 600 650 700 750 800 900 1000 1100 1200
GXA450-H RPM 300 340 380 410 450 490 530 560 600
Soft Start Setting:
1) Press the Soft Start button for 2 seconds to enter setting mode.
2) Press and hold the Soft Start button to increase the Soft Start duration.
As shown below, 3 steps are available. Selected color will remain lighten.
●
Green: 0.2 second
●
Red: 0.4 second
●
Orange: 0.6 second