60327-04/20
BS-5C color ID bit tray
39
Annex 3 - Configuration of equipment connected to
the bit tray
MD series controller
Enter the parameters using menu > parameters > inputs/outputs
Input configuration:
Input 1
Program 1
Input 2
Program 2
Input 3
Program 3
Input 4
None (not assigned)
Input 5
None (not assigned)
Input 6
Tool lock
Input 7
None (not assigned)
Input 8
None (not assigned)
Output configuration:
Output 1
Selection 1 return
Output 2
Selection 2 return
Output 3
Selection 3 return
Output 4
None (not assigned)
Output 5
None (not assigned)
Output 6
None (not assigned)
Output 7
None (not assigned)
Output 8
None (not assigned)
SD / HD series controller (in master mode only)
HDC controller
P64 = 1 or 3
SDC controller
P20 = 1 or 2 - P86 = 0
DPC Touch interface
Inputs and outputs 9, 10, 11 and 12 must remain unassigned in order to create
a continuous type output step to select the corresponding bit.
Summary of Contents for BS-5C
Page 1: ...433000 10 19 1 Instruction manual BS 5C COLOR ID BIT TRAY EN 60327 04 20 www dogassembly com...
Page 38: ...60327 04 20 BS 5C color ID bit tray 38 Annex 2 Input output program correspondence table...
Page 41: ...60327 04 20 BS 5C color ID bit tray 41 Setup Other I O 24V In In M In P In R In S In T...
Page 42: ...60327 04 20 BS 5C color ID bit tray 42...
