7
Ball dropper
A magnetic system located in the remote controller is used to switch the ball dropper
ON and OFF.
●
Switch-on
Place the bottom part of the remote controller to the upper edge of the ball dropper
(see picture). Red indicator light on the ball dropper blinks once (indication of correct
placing of the remote controller to the ball dropper). Green indicator light is lit up.
Remove the remote controller. Green indicator light starts blinking indicating the ball
dropper is ON, ready for use.
●
Switch-off
Place the bottom part of the remote controller to the upper edge of the ball dropper
(see picture). Red indicator light is lit up. Remove the remote controller.
The indicator light goes out. The ball dropper is OFF.
To prolong battery life, it is necessary to switch the ball dropper OFF after every use.
If the device is not used for a longer time period, removing battery is recommended.
Switch ON/OFF
Position of the ball dropper and remote controller
when switching ON/OFF and synchronising
the devices