Doepke DSU 8plus, Installation And Operating Manual, Page: 24 / 32

5. Configuring inputs I1..I8
5.1 Addressing
Selection Description
1.
S e t - u p
� A d d r . i n p u t s �
① ② ③ ④
» Select the menu item
indicated alongside
by pressing ① or ④.
» Skip to the submenu
by pressing ② or ③
2.
A d d r . i n p . I 1 :
� + A 5 + �
① ② ③ ④
» Press ① or ④ to select the
input whose address you
want to change.
» By pressing ② you can then
change the address group
from "A" to "P".
» By pressing ③ you can then
select an address digit from
"1" to "8".
» Continue this step until all the
inputs have been coded.
Note: The inputs are not addressed when the unit leaves the factory (address
entry "--"). To assign an address, first press key ③. To delete addressing again,
press key ③ until "--" appears.
3.
S a v e s e t t i n g s ?
� y e s n o �
① ② ③ ④
» Select the menu item indi-
cated alongside by pressing
① or ④. If applicable, skip the
addressing of other inputs in
order to do this.
» Press ② to save your
changes.
» Press ③ to discard your
changes.
5.2 Switching threshold setup
The DSU 8 plus allows you to assign one of two switching thresholds
to each input.
24
Doepke