doepfer
System A - 100
Subharmonic Generator
A-113
7
5
Preset
While button
5
is operated one reaches the
preset
mode
(see chapter 2 concerning the term
preset
). In
this state the displays of the third and fourth frequency
divider show “
Pr
" resp. the number of the preset
currently selected (e.g. “
45
", see fig. 6a):
Fig. 6
:
(a): display of the current preset
(b): store preset with new preset number
To
select a new preset
the up/down buttons
2
and
3
of the fourth frequency divider are used while the
preset button
5
is operated until the desired preset
number appears in the fourth display.
As soon as the preset button
5
is released the module
returns to the normal mode. The displays show the
divisors of the new preset and the divisors can be
adjusted with the corresponding up/dow buttons.
6
Store
The store button
6
is used to
store presets
. The
following steps are required to store a new preset:
D
Operate the preset button
5
and keep this button
pressed down (see fig. 6a).
D
The up/down buttons
2
and
3
are used to select
the preset number in which the current preset will
be stored (preset button
5
remains operated).
D
Pressing the store button
6
(preset button
5
still
remains operated) causes the storage of the cur-
rent preset into the preset number selected. In the
upper displays appears "
St
" and "
or
" as confirma-
tion of the storage process (see fig. 6b).
H
Pay attention not to select a preset num-
ber that already contains preset data you
may need in the future. Any former preset
data in the selected preset number are
deleted!
As soon as both buttons preset
5
and store
6
are
released the module returns to the normal mode. The
displays show the divisors and the divisors can be
adjusted with the corresponding up/dow buttons.
1
2
3
4
(a)
(b)
1
2
3
4
