Dodge Viper2017, User Manual

Page: 57 / 204

To Decrease Speed
When the Speed Control is set, you can decrease speed by pushing the SET (-) button.
The driver’s preferred units can be selected through the Uconnect settings if equipped.
Refer to "Uconnect Settings” in “Understanding Your Instrument Panel” in the Owner’s
Manual at www.dodge.com/en/owners/manuals for more information. The speed incre-
ment shown is dependent on the selected speed unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (-) button once will result in a 1 mph decrease in set speed. Each
subsequent tap of the button results in a decrease of 1 mph.
• If the button is continually pushed, the set speed will continue to decrease until the
button is released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET (-) button once will result in a 1 km/h decrease in set speed. Each
subsequent tap of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed will continue to decrease until the
button is released, then the new set speed will be established.
To Accelerate For Passing
Push the accelerator as you would normally. When the pedal is released, the vehicle will
return to the set speed.
NOTE:
If the accelerated speed goes above 10 mph (16 km/h) of the set speed, the Speed Control
will deactivate.
O P E R A T I N G Y O U R V E H I C L E
55