Dodge Ram Commercial2016 Owner'S Manual Download Page 394

Page: 394 / 675

TIP:

•

Voice Texting is not compatible with iPhone, but if
your vehicle is equipped with Siri Eyes Free, you can
use your voice to send a text message.

•

Messages are limited to 140 characters.

•

The Messaging button on the touchscreen must be
illuminated to use the feature.

Yelp (8.4A/8.4AN)

Once registered with Uconnect Access, you can use your
voice to search for the most popular places or things
around you.

1. Press the “Apps

” button on the touchscreen.

2. Press the “Yelp” button on the touchscreen.

3. Once the YELP home screen appears on the touch-

screen, push the VR button

, then say:

“YELP

search.”

4. Listen to the system prompts and after the beep, tell

Uconnect the place or business that you’d like
Uconnect to find.

392

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for Ram Commercial2016



































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Ram Commercial2016

Reviews:

Related manuals for Ram Commercial2016

Brands by name

Popular brands

Dodge Ram Commercial2016, Owner'S Manual

Search results

Summary of Contents for Ram Commercial2016

Reviews:

Related manuals for Ram Commercial2016

Brands by name

Popular brands