Dodge RAM 2017 Owner'S Manual Download | Manualshive

Page: 76 / 228

background image

CAUTION!

•

Mixing of engine coolant (antifreeze) other than speci-
fied Organic Additive Technology (OAT) engine cool-
ant (antifreeze), may result in engine damage and may
decrease corrosion protection. Organic Additive Tech-
nology (OAT) engine coolant is different and should
not be mixed with Hybrid Organic Additive Technol-
ogy (HOAT) engine coolant (antifreeze) or any “glob-
ally compatible” coolant (antifreeze). If a non-OAT
engine coolant (antifreeze) is introduced into the cool-
ing system in an emergency, the cooling system will
need to be drained, flushed, and refilled with fresh
OAT coolant (conforming to MS.90032), by an autho-
rized dealer as soon as possible.

(Continued)

CAUTION!

(Continued)

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional
rust inhibitors or antirust products, as they may not
be compatible with the radiator engine coolant and
may plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (anti-
freeze) is not recommended.

74

MAINTAINING YOUR VEHICLE

«
...
74
75
76
77
78
...
»

Summary of Contents for RAM 2017





































































































































































































































Reviews:

No comments

Related manuals for RAM 2017

Zaptruck-XL 2009

Brand: Zap Pages: 60

Brand: Komatsu Pages: 6

Brand: Komatsu Pages: 51

Automizer Versa Hand

Brand: Labrie Pages: 80

Freightliner Business class M2 100

Brand: Daimler Pages: 149

Brand: Global Pages: 24

Brand: Volvo Pages: 110

Brand: Volvo Pages: 144

SWAPLOADER SL-145

Brand: Efco Pages: 99

SWAPLOADER SL-185

Brand: Efco Pages: 109

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands