Remote Start — If Equipped
Push the remote start button
on the key fob
twice within five seconds. Pushing the remote
start button a third time shuts the engine off.
With Remote Start, the engine will only run for
15 minutes (timeout) unless the keyless ignition is
placed in the ON/RUN position.
Before the end of 15-minute cycle, push and
release the unlock button on the key fob to unlock
the doors and disarm the vehicle security alarm (if
equipped). Then, prior to the end of the
15-minute cycle, push and release the ignition
START/STOP button.
The vehicle must be started with the key fob after
two consecutive timeouts.
For further information and applicable warnings
and cautions, please refer to your Owner’s Infor-
mation at www.dodge.com/en/owners/manuals.
Parkview Rear Back-Up Camera
You can see an on-screen image of the rear of your
vehicle whenever the gear selector is put into
REVERSE. The ParkView Rear Back-Up Camera
image appears on the display screen located on
the center stack of the instrument panel.
NOTE:
If the display screen appears foggy, clean the
camera lens located on the rear of the vehicle
above the license plate.
For further information and applicable warnings
and cautions, please refer to your Owner’s Manual
at www.dodge.com/en/owners/manuals.
Instrument Cluster Display
The instrument cluster display features a driver
interactive display that is located in the instru-
ment cluster. Pushing the controls on the left side
of the steering wheel allows the driver to select
vehicle information and Personal Settings.
Instrument Cluster Display Controls
R E M O T E S T A R T
S A F E T Y F E A T U R E S
I N S T R U M E N T C L U S T E R
D I S P L AY
