• Driver Interactive Display (Compass, Temp,
Range to Empty, Trip A, Trip B, Average Fuel
Economy, Current Fuel Economy, Time, Trailer
Trip and Gain)
• All Wheel Drive (AWD) Status — If Equipped
The instrument cluster display will normally
display the main menu or the screens of a
selected feature of the main menu. The main
display area also displays “pop up” messages
that consist of approximately 60 possible warn-
ing or information messages. These pop up
messages fall into several categories:
•
Five Second Stored Messages
When the appropriate conditions occur, this
type of message takes control of the main
display area for five seconds and then returns
to the previous screen. Most of the messages
of this type are then stored (as long as the
condition that activated it remains active) and
can be reviewed from the “Messages” main
menu item. Examples of this message type
are “Right Front Turn Signal Lamp Out” and
“Low Tire Pressure.”
•
Unstored Messages
This message type is displayed indefinitely or
until the condition that activated the message
is cleared. Examples of this message type are
“Turn Signal On” (if a turn signal is left on)
and “Lights On” (if driver leaves the vehicle).
•
Unstored Messages Until RUN
These messages deal primarily with the Re-
mote Start feature. This message type is dis-
played until the ignition is in the RUN state.
Examples of this message type are “Remote
Start Canceled - Door Ajar” and “Press Brake
Pedal and Push Button to Start.”
•
Five Second Unstored Messages
When the appropriate conditions occur, this
type of message takes control of the main
display area for five seconds and then returns
to the previous screen. An example of this
message type is “Automatic High Beams On.”
Engine Oil Life Reset
Oil Change Required
Your vehicle is equipped with an engine oil
change indicator system. The “Oil Change Re-
quired” message will display in the instrument
cluster display for five seconds after a single
chime has sounded, to indicate the next sched-
uled oil change interval. The engine oil change
indicator system is duty cycle based, which
means the engine oil change interval may fluctu-
ate, dependent upon your personal driving style.
Unless reset, this message will continue to dis-
play each time you place the ignition in the
ON/RUN position. To turn off the message tem-
porarily, push and release the
OK
or arrow but-
tons. To reset the oil change indicator system
(after performing the scheduled maintenance),
refer to the following procedure.
Vehicles Equipped With Keyless Enter-N-Go —
Ignition
Use the steering wheel instrument cluster dis-
play controls for the following procedure(s):
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the
down
arrow button to
scroll downward through the main menu to
“Vehicle Info.”
3. Push and release the
right
arrow button to
access the ”Oil Life” screen.
GETTING
TO
KNOW
YOUR
INSTRUMENT
P
ANEL
68
Summary of Contents for DURANGO 2019
