Lower Anchors And Tethers For CHildren (LATCH) Restraint System
Your vehicle is equipped with the child
restraint anchorage system called LATCH,
which stands for Lower Anchors and Tethers
for CHildren. The LATCH system has three
vehicle anchor points for installing LATCH-
equipped child seats. There are two lower
anchorages located at the back of the seat
cushion where it meets the seatback and
one top tether anchorage located behind
the seating position. These anchorages are
used to install LATCH-equipped child seats without using the vehicle’s seat belts. Some
seating positions may have a top tether anchorage but no lower anchorages. In these
seating positions, the seat belt must be used with the top tether anchorage to install the
child restraint. Please see the following table for more information.
LATCH Positions For Installing Child Restraints In This Vehicle
Frequently Asked Questions About Installing Child Restraints With LATCH
What is the weight limit
(child’s weight of
the child restraint) for using
the LATCH anchorage sys-
tem to attach the child re-
straint?
65 lbs (29.5 kg)
Use the LATCH anchorage
system until the combined
weight of the child and the
child restraint is 65 lbs
(29.5 kg). Use the seat belt
and tether anchor instead of
the LATCH system once the
combined weight is more
than 65 lbs (29.5 kg).
LATCH Label
LATCH Positions For Installing Child
Restraints In This Vehicle
Lower Anchorage Symbol (2 Anchor-
ages Per Seating Position)
Top Tether Anchorage Symbol
G E T T I N G S T A R T E D
45
Summary of Contents for charger 2017
Page 271: ...NOTES 269 ...
Page 272: ...NOTES 270 ...
Page 273: ...NOTES 271 ...
Page 274: ...NOTES 272 ...