Stopping
1. Place the gear selector in PARK.
2. Push the ENGINE START/STOP button once. The ignition switch will return to the OFF
position.
If the gear selector is not in PARK, the ENGINE START/STOP button must be held for two
seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will shut off.
NOTE:
If the ignition switch is left in the ACC or RUN (engine not running) position and the
transmission is in PARK, the system will automatically time out after 30 minutes of
inactivity and the ignition will switch to the OFF position.
Accessory Positions With Engine Off
NOTE:
The following functions are with the driver’s foot off of the Brake Pedal (transmission in
PARK).
Beginning With The Ignition Switch In The OFF Position:
1. Push the ENGINE START/STOP button once to cycle the ignition to the ACC position.
2. Push the ENGINE START/STOP button a second time to cycle the ignition to the
ON/RUN position.
3. Push the ENGINE START/STOP button a third time to return the ignition to the OFF
position.
NOTE:
If the ignition is left in the ACC or ON/RUN
(engine not running) position and the trans-
mission is in PARK, the system will auto-
matically time out after 30 minutes of inac-
tivity, and the ignition is returned to the OFF
position.
VEHICLE SECURITY ALARM
The vehicle security alarm monitors the vehicle doors for unauthorized entry and the
ignition for unauthorized operation. While the vehicle security alarm is armed, interior
switches for door locks and trunk release are disabled. If something triggers the alarm, the
vehicle security alarm will provide the following audible and visible signals: the horn will
pulse, the park lamps and/or turn signals will flash, and the vehicle security light in the
instrument cluster will flash.
Ignition Positions
G E T T I N G S T A R T E D
20
Summary of Contents for charger 2017
Page 271: ...NOTES 269 ...
Page 272: ...NOTES 270 ...
Page 273: ...NOTES 271 ...
Page 274: ...NOTES 272 ...