Dodge Challenger SRT 392, Owner'S Manual

Page: 162 / 579

•
The shift lever/gear selector is removed from the
Drive position.
•
The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.
•
The vehicle parking brake is applied.
•
A Trailer Sway Control (TSC) event occurs.
•
The driver switches ESC to full-off mode.
To Turn Off
The system will turn off and erase the set speed in
memory if:
•
The Normal (Fixed Speed) Electronic Speed Control
ON/OFF button is pressed.
•
The ignition is turned off.
•
The Adaptive Cruise Control (ACC) On/Off button is
pressed.
To Resume
If there is a set speed in memory press the RES (resume)
button and then remove your foot from the accelerator
pedal. The DID will display the last set speed.
WARNING!
The Resume function should only be used if traffic
and road conditions permit. Resuming a set speed
that is too high or too low for prevailing traffic and
road conditions could cause the vehicle to accelerate
or decelerate too sharply for safe operation. Failure to
follow these warnings can result in a collision and
death or serious personal injury.
To Vary The Speed Setting
To Increase Speed
While ACC is set, you can increase the set speed by
pressing the SET + button.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE