Dodge Challenger 2018 Owner'S Manual Download Page 484

Page: 484 / 512

Refer to your Uconnect Owner’s Manual Supplement for

further information.

Android Auto — If Equipped

Android Auto allows you to use your voice to interact with

Android’s best-in-class speech technology through your

vehicle’s voice recognition system, and use your smart-

phone’s data plan to project your Android powered smart-

phone and a number of its apps onto your Uconnect

touchscreen. Connect your Android 5.0 (Lollipop), or

higher, to one of the media USB ports, using the factory-

provided USB cable, and press the new Android Auto icon

that replaces your “Phone” icon on the main menu bar to

begin Android Auto. Push and hold the VR button on the

steering wheel, or press and hold the “Microphone” icon

within Android Auto, to activate Android’s VR, which

recognizes natural voice commands, to use a list of your

smartphone’s features:

•

Maps

•

Music

•

Phone

•

Text Messages

•

Additional Apps

Uconnect 4C/4C NAV Apple CarPlay

482 MULTIMEDIA

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands