Dodge Challenger 2018 Owner'S Manual Download Page 48

Page: 48 / 512

Vehicles Equipped With Remote Start
On models that are equipped with remote start, the venti-

lated seats can be programmed to come on during a remote

start.
This feature can be programmed through the Uconnect

system. Refer to “Uconnect Settings” in “Multimedia” for

further information.

Folding Rear Seat

The rear seatbacks can be folded forward to provide an

additional storage area. Pull on the loops located on the

upper part of the rear seatback to fold down either or both

seatbacks. These loops can be tucked away when not in

use.
NOTE:

You may experience deformation in the seat cush-

ion from the seat belt buckles if the seats are left folded for

an extended period of time. This is normal and, by simply

opening the seats to the open position, over time the seat

cushion will return to its normal shape.

Folding Rear Seatback Loop

46 GETTING TO KNOW YOUR VEHICLE

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands