Dodge Challenger 2018 Owner'S Manual Download Page 338

Page: 338 / 512

Lubricants which do not have both the engine oil certifi-

cation mark and the correct SAE viscosity grade number

should not be used.
Engine Oil Viscosity (SAE Grade) — 5.7L Engine
Mopar SAE 5W-20 engine oil approved to FCA Material

Standard MS-6395 such as Pennzoil, Shell Helix Ultra or

equivalent is recommended for all operating temperatures.

This engine oil improves low temperature starting and

vehicle fuel economy.
The engine oil filler cap also shows the recommended

engine oil viscosity for your engine. For information on

engine oil filler cap location, refer to the “Engine Compart-

ment” illustration in this section.
NOTE:

Vehicles equipped with a 5.7L engine must use SAE

5W-20 oil. Failure to do so may result in improper opera-

tion of the Fuel Saver Technology. Refer to “Fuel Saver

Technology – If Equipped” in “Starting And Operating” for

further information.
Lubricants which do not have both the engine oil certifi-

cation mark and the correct SAE viscosity grade number

should not be used.

Engine Oil Viscosity — 6.4L Engine
Use Pennzoil Ultra Platinum 0W-40 engine or equivalent

Mopar oil meeting the FCA Material Standard MS-12633

for use in all operating temperatures.
The engine oil filler cap also shows the recommended

engine oil viscosity for your engine. For information on

engine oil filler cap location, refer to “Engine Compart-

ment” in this section for further information.
Synthetic Engine Oils
You may use synthetic engine oils provided the recom-

mended oil quality requirements are met, and the recom-

mended maintenance intervals for oil and filter changes are

followed.
Synthetic engine oils which do not have both the engine oil

certification mark and the correct SAE viscosity grade

number should not be used.
Shaker Hood — If Equipped
Shaker Hood Oil Filler

For vehicles equipped with a “Shaker Hood”, the upper

scoop will need to be removed so that oil can be properly

added to the engine.

336 SERVICING AND MAINTENANCE

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands