Dodge 2016 Viper SRT ACR, Owner'S Manual

Page: 257 / 427

TRACK USE
Guidelines For Track Use
NOTE: Because of the extreme conditions encountered
during track use, any damage or wear associated with
track use is not covered by warranty.
•
It is recommended that the shocks be operated in
RACE mode, if equipped.
•
ESC is track capable in all modes.
Prior To Each Track Event/Day
•
Verify all fluids are at the correct levels. Refer to “Fluid
Capacities” in “Maintaining Your Vehicle” for further
information.
•
Verify the front and rear brake pads have more than
½ pad thickness remaining. If the brake pads require
changing, please burnish prior to track outing at full
pace.
•
Tire pressure:
– 35psi hot recommended. This typically can be
achieved with cold pressures between 25 and 29 psi,
depending on driver, track, and ambient conditions.
Conclusion Of Each Track Event
•
It is recommended that a brake bleed procedure is
performed to maintain the pedal feel and stopping
capability of your brake system.
•
It is recommended that each track outing should end
with a minimum of 1 cool down lap using minimal
braking.
•
Following each track session, tires should be inspected
for wear.
5
STARTING AND OPERATING 255