Dodge 2016 JOURNEY Owner'S Manual Download Page 164

Page: 164 / 664

Emergency And Towing Assistance

The Emergency and Towing Assistance Favorite numbers
can only be altered. These cannot be deleted and the
names cannot be changed.

To change the Emergency or Towing Assistance numbers
follow these steps.

1. Press the “Phonebook” button from the Phone main

screen.

2. Press the “Favorites” button on the touchscreen. Scroll

to the bottom of the list to locate the Emergency and
Towing Assistance Favorites.

3. Press the “+” Options button on the touchscreen.

4. Press the “+” next to appropriate Favorite that is to be

altered.

5. The Options pop-up will appear and you can choose

between Editing the number or resetting the number
to default.

Emergency And Breakdown Assistance

162

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2016 JOURNEY
























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 JOURNEY

Reviews:

Brands by name

Popular brands

Dodge 2016 JOURNEY, Owner'S Manual

Search results

Summary of Contents for 2016 JOURNEY

Reviews:

Brands by name

Popular brands