Dodge 2015 Journey Owner'S Manual Download Page 482

Page: 482 / 648

the TPMS will update automatically. In addition, the

“Tire Pressure Monitoring Telltale Light” will turn off

and the graphic in the EVIC will display a new

pressure value instead of dashes (- -), as long as no tire

pressure is below the low-pressure warning limit in

any of the four active road tires. The vehicle may need

to be driven for up to 20 minutes above 15 mph

(24 km/h) in order for the TPMS to receive this

information.

General Information

This device complies with Part 15 of the FCC rules and

RSS 210 of Industry Canada. Operation is subject to the

following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received,

including interference that may cause undesired op-

eration.

The tire pressure sensors are covered under one of the

following licenses:

United States

MRXSSW4

Canada

2546-SSW4

FUEL REQUIREMENTS

This engine is designed to meet all emis-

sions regulations and provide excellent

fuel economy and performance when us-

ing high-quality unleaded “regular” gaso-

line having an octane rating of 87. The use

of premium gasoline is not recommended, as it will not

provide any benefit over regular gasoline in these

engines.
Light spark knock at low engine speeds is not harmful to

your engine. However, continued heavy spark knock at

high speeds can cause damage and immediate service is

480 STARTING AND OPERATING

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands