Dodge 2014 Avenger Owner'S Manual Download Page 86

Page: 86 / 517

Can two child restraints be attached using a

common lower LATCH anchorage?

Never “share” a LATCH anchorage with two

or more child restraints. If the center posi-

tion does not have dedicated LATCH lower

anchorages, use the seat belt to install a child

seat in the center position next to a child

seat using the LATCH anchorages in an out-

board position.

Can the rear-facing child restraint touch the

back of the front passenger seat?

Yes

The child seat may touch the back of the

front passenger seat if the child restraint

manufacturer also allows contact. See your

child restraint owner’s manual for more in-

formation.

Can the head restraints be removed?

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2014 Avenger






































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Avenger

Reviews:

Related manuals for 2014 Avenger

Brands by name

Popular brands

Dodge 2014 Avenger, Owner'S Manual

Search results

Summary of Contents for 2014 Avenger

Reviews:

Related manuals for 2014 Avenger

Brands by name

Popular brands