manualshive.com logo in svg

Dodge 2012 Charger, Owner'S Manual

The Dodge 2012 Charger Owner's Manual is a comprehensive guide packed with essential information to help you get the most out of your vehicle. Download the manual for free from manualshive.com and ensure you have all the necessary instructions and tips to maintain and operate your Dodge Charger efficiently.

Share
Download
background image

Disposing Of Used Engine Oil And Oil Filters

Care should be taken in disposing of used engine oil and
oil filters from your vehicle. Used oil and oil filters,
indiscriminately discarded, can present a problem to the
environment. Contact your authorized dealer, service
station, or governmental agency for advice on how and
where used oil and oil filters can be safely discarded in
your area.

Engine Oil Filter

The engine oil filter should be replaced with a new filter
at every engine oil change.

Engine Oil Filter Selection

This manufacturer’s engines have a full-flow type oil
filter. Use a filter of this type for replacement. The quality
of replacement filters varies considerably. Only high
quality filters should be used to assure most efficient
service. MOPAR

威

engine oil filters are a high quality oil

filter and are recommended.

Engine Air Cleaner Filter

Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

WARNING!

The air induction system (air cleaner, hoses, etc.) can
provide a measure of protection in the case of engine
backfire. Do not remove the air induction system (air
cleaner, hoses, etc.) unless such removal is necessary
for repair or maintenance. Make sure that no one is
near the engine compartment before starting the
vehicle with the air induction system (air cleaner,
hoses, etc.) removed. Failure to do so can result in
serious personal injury.

498

MAINTAINING YOUR VEHICLE

Summary of Contents for 2012 Charger



















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Charger

Pacbrake 10475 Installation Manual preview
10475
Brand: Pacbrake Pages: 9
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
iRacing Porsche 911 GT3 R User Manual preview
Porsche 911 GT3 R
Brand: iRacing Pages: 25
PEUGEOT 407 2010 Manual preview
407 2010
Brand: PEUGEOT Pages: 249
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
Beper P205DIF100 Manual preview
P205DIF100
Brand: Beper Pages: 52
Caraudio-Systems RL-LR12-TF Manual preview
RL-LR12-TF
Brand: Caraudio-Systems Pages: 9
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
Jeep CHEROKEE 2017 User Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 374
TomTom LINK 105 Installation Manual preview
LINK 105
Brand: TomTom Pages: 22
FIRRAK FIRRAK arca Assembly Instructions Manual preview
FIRRAK arca
Brand: FIRRAK Pages: 12
Cadillac Escalade ESV Owner'S Manual preview
Escalade ESV
Brand: Cadillac Pages: 538
BMW 530 GRAN TURISMO - 2010 Brochure preview
530 GRAN TURISMO - 2010
Brand: BMW Pages: 26
PowerMadd Tri-Mount 34269 Mounting Tips preview
Tri-Mount 34269
Brand: PowerMadd Pages: 2
Navman F-Series B2+ User Manual preview
F-Series B2+
Brand: Navman Pages: 10

Brands by name

Popular brands

Load more brands