manualshive.com logo in svg

Dodge 2011 Dodge Nitro, Owner'S Manual

The Dodge 2011 Dodge Nitro Owner's Manual is an essential guide for Nitro owners, providing detailed information on operating and maintaining this rugged SUV. At manualshive.com, you can easily access and download this comprehensive manual for free, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

The first stage inflator is triggered immediately during an
impact that requires air bag deployment. This low output
is used in less severe collisions. A higher energy output is
used for more severe collisions.

NOTE:

The passenger Advanced Front Air Bag may not

deploy, even when the driver Advanced Front Air Bag
has, if the Occupant Classification System (refer to

⬙

Oc-

cupant Classification System”) has determined the pas-
senger seat is empty or is occupied by someone that is
classified in the

⬙

child

⬙

size category. This could be a

child, teenager, or even an adult.

WARNING!

•

No objects should be placed over or near the air bag
on the instrument panel, because any such objects
could cause harm if the vehicle is in a collision
severe enough to cause the air bag to inflate.

(Continued)

WARNING! (Continued)

•

Do not put anything on or around the air bag
covers or attempt to manually open them. You may
damage the air bags and you could be injured
because the air bags may no longer be functional.
These protective covers for the air bag cushions
are designed to open only when the air bags are
inflating.

•

Do not use accessory seat covers or place objects
between you and the side air bags; the perfor-
mance could be adversely affected and/or objects
could be pushed into you, causing serious injury.

•

Do not drill, cut or tamper with the knee bolster in
any way.

•

Do not mount any accessories to the knee bolster
such as alarm lights, stereos, citizen band radios,
etc.

(Continued)

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

61

Summary of Contents for 2011 Dodge Nitro


















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Dodge Nitro

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Brand: Streetwize Pages: 20
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
Mazda 2006 RX-8 Service Highlights preview
2006 RX-8
Brand: Mazda Pages: 122
Vauxhall Astra 2021 Owner'S Manual preview
Astra 2021
Brand: Vauxhall Pages: 259
Big Mikes Performance Parts STO N SHO SNS 144 Installation Procedures Manual preview
STO N SHO SNS 144
Brand: Big Mikes Performance Parts Pages: 7
Lincoln MKZ 2018 Quick Reference Manual preview
MKZ 2018
Brand: Lincoln Pages: 10
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
Air Lift 88365 Installation Manual preview
88365
Brand: Air Lift Pages: 28
Dolphin DAS400 Owner'S Manual preview
DAS400
Brand: Dolphin Pages: 16
Honda 08B15-SDN-100 Installation Instructions Manual preview
08B15-SDN-100
Brand: Honda Pages: 22
Mercedes-Benz 2013 CL Operator'S Manual preview
2013 CL
Brand: Mercedes-Benz Pages: 494
Safe Fleet Prime Design OCM-3032 Quick Start Manual preview
Prime Design OCM-3032
Brand: Safe Fleet Pages: 4
CITROEN 2 CV4 Owner'S Manual preview
2 CV4
Brand: CITROEN Pages: 86
Chevrolet 2012 Malibu Owner'S Manual preview
2012 Malibu
Brand: Chevrolet Pages: 376

Brands by name

Popular brands

Load more brands