Dodge 2009 Ram Chassis Cab Owner'S Manual Download Page 32

Page: 32 / 429

5. Within 30 seconds, press the driver’s door LOCK
switch in the UNLOCK direction.

6. A single chime will sound to indicate the feature has
been changed.

7. Repeat the above steps to alternate the availability of
this feature.

8. If a chime is not heard, the program mode was
canceled before the feature could be changed. If neces-
sary, repeat the above procedure.

Child Protection Door Lock

To provide a safer environment for children riding in the
rear seat, the rear doors of your vehicle have the Child
Protection Door Lock system.

Child Protection Door Lock Location

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2009 Ram Chassis Cab














































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Ram Chassis Cab

Reviews:

Related manuals for 2009 Ram Chassis Cab

Brands by name

Popular brands

Dodge 2009 Ram Chassis Cab, Owner'S Manual

Search results

Summary of Contents for 2009 Ram Chassis Cab

Reviews:

Related manuals for 2009 Ram Chassis Cab

Brands by name

Popular brands