Dodge 2008 KA Nitro, Owner'S Manual

Page: 90 / 434

To activate the UConnect
t
system from idle, simply press
the “Phone” button and follow audible prompts for
directions. All UConnect
t
system sessions begin with a
press of the “Phone” button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say
9
Cancel
9
and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) UConnect
t
System to a Cellular Phone
To begin using your UConnect
t
system, you must pair
your compatible Bluetooth™ enabled cellular phone.
To complete the pairing process, you will need to refer-
ence your cellular phone owner’s manual. The UCon-
nect
t
website may also provide detailed instructions for
pairing.
The following are general phone to UConnect
t
System
pairing instructions:
•
Press the “Phone” button to begin.
•
After the
9
Ready
9
prompt and the following beep, say
9
Setup Phone Pairing.
9
•
When prompted, after the beep, say
9
Pair a Phone
9
and
follow the audible prompts.
•
You will be asked to say a four-digit pin number,
which you will later need to enter into your cellular.
You can enter any four-digit pin number. You will not
need to remember this pin number after the initial
pairing process.
•
For identification purposes, you will be prompted to
give the UConnect
t
system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE