5
TEMPO / REGEN footswitch is held.
The REGEN ADJUST pot is a clear backlit potentiometer with a white LED underneath. The LED under
the pot will blink at the delay time set by the TIME knob or by tapping in the tempo using the TEMPO/
REGEN footswitch. The LED will blink even when the effect is bypassed, allowing you to tap in a time
before turning on the delay. The LED will light solid when the TEMPO/REGEN footswitch is pressed and
held to enable the secondary REPEATS state.
11. TEMPO / REGEN footswitch
Tap this footswitch to tap in the delay time. The time is set based on the interval between taps in
conjunction with the TAP RATIO switch position. Tapping in the tempo can be done while the effect
is enabled or bypassed. Pressing and holding this footswitch will enable the REGEN feature, toggling
the REGEN ADJUST pot into the audio path and the REPEATS pot out of the audio path to create a
secondary momentary delay regeneration setting using the REGEN ADJUST pot. Releasing the TEMPO
/ REGEN footswitch will toggle back to normal operation, with the REPEATS pot again in the audio
path.
Summary of Contents for rubberneck
Page 1: ......
