1
2
3
4
5
7
6
9
8
1. LEVEL - Sets the output level of the effect. It is recommended that you turn this down
when switching to high gain mode to avoid any large jumps in volume.
2. GAIN - Controls how easily the pedal is pushed into overdrive. Because the Looking
Glass rewards dynamic playing, most settings can produce a clean sound when
picking lightly. The maximum level of overdrive increases as this knob is
turned up.
3. BASS CUT/TREBLE - The BASS CUT knob adjusts the amount of low end content in the
incoming signal (before the overdrive). It is recommended that you start by
setting this control at noon and adjusting upwards or downwards to thicken or
clear up the overdrive to taste. Hint: Set at maximum, this control produces a
very raw sound.
The TREBLE knob adjusts the brightness of the pedal’s overdriven sound. Hint:
You may want to move this control to roughly line up with the Bass Cut control
for a balanced sound The concentric control design makes this easy to do on
the fly. Or, for less neutral sounds, set the two indicators differently from one
another to create the drive sound that works best for you.
Summary of Contents for LOOKING GLASS OVERDRIVE
Page 1: ......
