DOD hummer, User Manual

Page: 20 / 48

18
Basic Camera Operation
Everyday Operation
Your camera will automatically turn on and start recording when it starts receiving power. By
default, the camera will record over the oldest videos when the memory card is full (loop
recording).
Continuously Powered Electrical Outlet
If your camera is continuously powered, the camera will not automatically shut down when
your motorcycle is turned off. To turn off your camera, the USB cable can be pulled out or the
power button can be pressed (see the below section).
The camera may be left on while parked to capture video while you are away.
“Continuously-Powered-Electrical-Outlet” operation will slowly drain your
motorcycle’s battery and may eventually prevent your motorcycle from
starting.
Manually Turning On / Off Your Camera
Press [ /
M
]to turn on /off your camera.
Press [ / OK ]to begin recording.