OPERATION OF THE FX96
The FX96 can be operated in front of an amplifier or in an
effects loop. Since the order of the effects is very important,
they should be ordered as follows: 1) compression effects
(DOD FX84), 2) Wah/volume and envelope filters (DOD
FX17, FX25), 3) Distortion effects or preamps (DOD
FX102, FX69B), 4) EQ’s (DOD FX40), 5) chorus, flanging,
phasing, vibrato (DOD FX75C), 6) Delay and reverb effects
(DOD DFX98, FX 96).
To set up your own sound with the FX96, set all controls at
12 o’clock. Then adjust the DELAY TIME and
REGEN/REPEAT controls for the desired Delay time and
Delay repeats. Next, adjust the MIX (DRY/TAPE) control
for the desired amount of effect. Finally, dial in the quality
of the Tape delay by adjusting the TAPE QUALITY knob
control.
