多可
在您构建玩具前请先阅读下列内容,以保证儿童的安全并防止玩具损坏
,
更多说明请到我
Before you start constructing and use our product
,
please carefully read the following
safety warning and download our manual from our website:
警告说明!
多可
的装配和使用需由成人陪同
,
并且成人需悉知所有警告条款和安装注意事项。
DOCYKE
的所有正规渠道销售的零部件都通过严格测试的合格产品,由于不遵照条款带来的人员受伤
或产品损坏,我们将不承担任何责任。
WARNING!
DOCYKE
use only under close adult supervision. Parents must review the
following warnings and instructions with each ride that is being build. It is
your responsibility to review this information and make sure that all riders
understand all warnings
,
cautions
,
instructions and safety topics
,
and assure
that young riders are able to safely and responsibly use this product. We
recommends that you periodically review and reinforce the information in this
manual with younger riders
,
and that you inspect and maintain your docyke rides
to insure their safety.
The rides that you can find in our manuals have been tested by official
independent testing agencies. We will not be responsible or liable
,
directly or
indirectly
,
in any way for any loss or damage of any kind incurred as a result
of your decision to build constructions or rides that differ from the official
rides that we show in our manuals
。
多可
使用规范:
DOCYKE
use specification:
1
)
多可
由多个零件组装而成,在使用过程中会造成零件松动,请及时检查并紧固好零件。
Check
frequently if all parts are still firmly tightened and function
properly.
2
)
多可
的所有零件都为官方测试的合格零件,但如果不按操作说明,超过零件的装配力矩
(15NM)
或产品的承重载荷会损坏零件。
警告说明!
WARNING!
请在成人指导下安装使用。
This ride has to be assembled by an adult.
Summary of Contents for L-06
