221 Main Street, Suite 1000, San Francisco, CA 94105
Ι
Tel. 866.219.4318
Ι
www.docusign.com
Ι
© DocuSign, Inc.
5. Tighten all four screws (the two screws securing the front rail-support, and the two screws
securing the rear rail-support).
6. Verify that the front and rear rail-supports now form a broken single rail-support, running from
the front to the rear of the rack (see
).
Figure 3
Note:
The center slits in the rail-supports are used in
to attach the rails to the rail-supports.
Step 2: Attach two rail-supports (front and rear) to the left side of the rack
In this step, you will attach the rail supports to the left side of the rack:
A front rail-support to the front of the rack
A rear rail-support to the rear of the rack.
The two rail-supports should be aligned with each other.
Follow the instructions detailed in
, but install the rail-supports on the
left
side of the rack.
Note
: The rail supports for the left side of the rack are identical to the rail supports for the right side of
the rack.
Step 3: Attach rails to rail-supports
In this step you will:
Attach a rail to the inner side of the right rail-supports.
Attach a rail to the inner side of the left rail-supports.
1. Prepare the following:
Two rails
