Docomo STYLE Series P-03A, Instruction Manual, Page: 554 / 581

21
1
“ [ スタート (Start)]”
1
“ 接続先 (Access point)”
1
Click “ 接続または
ネットワークをセットアップします
(Setup the connection or network)”.
2
Select “ ダイヤルアップ接続を
セットアップします (Setup the
dial-up connection)”, then click
“
次へ
(Next)”.
3
If the display for selecting a modem appears, click “FOMA P03A”.
≥
The display for selecting a modem appears only when you have registered two or more modems.
■ Specifying “caller ID notified/not notified” in dial-up network
Also by dial-up network setting (see page 21), you can add “186 (notify)” or “184 (not notify)” to each access point number.
When you specify “186 (notify)” or “184 (not notify)” using both the
¢
DGPIR command and dial-up network setting, the caller ID is set as
follows:
≥
To connect to “mopera U” or “mopera”, you need to notify your caller ID.
Set Dial-up Network for Windows Vista
Dial-up network
setting (cid = 3) Caller ID notification setting by
¢
DGPIR command
Notify/Not notify caller ID
¢
99
¢¢¢
3# Not set Notify
Not notify Not notify
Notify Notify
184
¢
99
¢¢¢
3# Not set Not notify
(“184” specified in the dial-up network has a priority)
Not notify
Notify
186
¢
99
¢¢¢
3# Not set Notify
(“186” specified in the dial-up network has a priority)
Not notify
Notify
Continued to Next Pa g e