Docomo foma N905i, Manual

Page: 503 / 548

18
5
Enter the connection name, select the
connection method and click "
次へ "
(Next)
You can specify the name of the connection.
Enter a name easy to recognize in the "
接続名 "
(Connection name) column.
You cannot use the following reserved
characters: ¥/:
＊ ?!<> │ (half-pitch only).
Select the " 発信者番号通知 " (Caller ID setting)
and "
接続方式
" (Connection method).
As for " 発信者番号通知 " (Caller ID setting),
select "
設定しない（推奨）
" (OFF
(Recommended)) for overseas use.
As for "
接続方式
" (Connection method), mopera U
supports both "PPP 接続 " (PPP connection) and "IP
接続
" (IP connection). mopera supports "PPP
接続
"
(PPP connection) only. Select "IP 接続 " (IP
connection) for overseas use.
6
Specify a user ID and password,
select the accessible user and
click "
次へ
" (Next)
You can leave user ID and password blank for
the mopera U or mopera connection.
When "
すべてのユーザー
" (All users) is
selected in the "
使用可能ユーザーの選択
"
(Selecting accessible user) column, the
connection setting is applied to all the users
registered in Windows.
For Windows Vista
Specify the user ID and password and click
"
次へ " (Next)
Proceed to Step 8.
7
Check " 最適化を行う " (Optimize
the setting) and click " 次へ " (Next)
Optimize the communication settings of a PC to use FOMA packet communication. If they are already
optimized, this screen does not appear.
8
Check the setting information and
click "
完了
" (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking "
デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click "
戻る " (Back).
9
Click "OK"
You need to restart the PC to enable the changes in the settings. If the restart selection screen
appears, click "
はい " (Yes).
Execute communication. → p.23