Dock Doctors Wall-Mounted Storage Rack Assembly Instructions Manual Download Page 3

Page: 3 / 10

Toll Free: 1-800-870-6756 | [email protected] | www.thedockdoctors.com

Dock Doctors

The

LLC

Step 1: Pre-assemble hardware ARM BRACKETS:

Assembly of your rack will be easier if you install hardware onto

some of the components before assembling them onto the rack.

Install (1) allen bolt, (1) eye bolt and (2) brass nuts onto each of the (6) arm brackets.

Loosely install the allen and eye bolts onto the arm brackets (do not tighten them).

NOTE: You will have “left” and “right” arm brackets. When assembled, the allen and

eye bolts will face the inside of the rack when installed onto the rack (

see Figure A)

left side arm

right side arm

ALLEN BOLT

BRASS NUT

EYE BOLT

channel

for brass

nut

channel

for brass

nut

allen

bolt

eye bolt

ARM BRACKET

To install the allen and eye bolts, hold the

arm bracket horizontally or place it on a

flat surface. Slide (1) brass nut into the

channel.

Use the included allen wrench to

slide the nut into place.

Loosely thread the

allen bolt or eye bolt onto the brass nut.

ASSEMBLY TIP

Step 1

Parts Needed

Quantity

Arm Brackets

Eye Bolts

Allen Bolts

Brass Nuts

Wall-Mounted Storage Rack:

Assembly Instructions

Summary of Contents for Wall-Mounted Storage Rack











Search results

Summary of Contents for Wall-Mounted Storage Rack

Reviews:

Related manuals for Wall-Mounted Storage Rack

Brands by name

Popular brands

Dock Doctors Wall-Mounted Storage Rack, Assembly Instructions Manual

Search results

Summary of Contents for Wall-Mounted Storage Rack

Reviews:

Related manuals for Wall-Mounted Storage Rack

Brands by name

Popular brands