Dobot Magician Lite User Manual Download

Page: 70 / 72

Dobot Magician Lite User Guide

Operation

Issue V1.9.1 (2020-01-11)

User Guide

No.

Description

The running log of Magician Lite

The corresponding codes of the blockly module on the

programming window

The demo in Figure 5.55 is described as follows.

Set the end-effector as

Gripper

Set the loop number as 3 and make the Z-axis move back and forth 3 times.

Set the pause time as 3.

The Saving Blockly file page is displayed.



NOTE

You can also click

Download

to download Blockly file to Magic Box to perform in

offline mode, for the details, please refer to 5.4Working in Offline Mode.

Scripting

You can control Magician Lite over scripting. Magic Box supports various API, such as

velocity setting, motion mode setting, and I/O configuration, which can be called by users during

secondary development

The

download

path

https://www.dobot.cc/downloadcenter/dobot-magician-

lite.html?sub_cat=187#sub-download

Prerequisites



Magic Box + Magician Lite has been powered on.



Magic Box + Magician Lite has been connected to DobotStudio successfully.

Procedure

The

Script

page is displayed.

You can call the interface by double-clicking on the left pane of the

Script

page, the

corresponding interface will be displayed on the middle pane, as shown in Figure

5.56. You can also click

icon on the corresponding interface to view the way

Summary of Contents for Magician Lite









































































Search results

Summary of Contents for Magician Lite

Reviews:

Related manuals for Magician Lite

Brands by name

Popular brands

Dobot Magician Lite, User Manual

Search results

Summary of Contents for Magician Lite

Reviews:

Related manuals for Magician Lite

Brands by name

Popular brands