doble TDR9000, User Manual, Page: 164 / 454

Configuring Test Plans
4-66 72A-1898 Rev. A 11/01
Monday
, November 26, 2001 1:09 pm
When OK is clicked on the Parameters window, the TDR9000 tab
reappears with a T icon displayed, as shown in Figure 4.39. This icon
indicates that a trigger is configured.
Figure 4.39 Trigger Indicator
N
OTE
Once any external trigger is configured, all fields on the Parameters tab
except the Recording Length are disabled and it appears as shown in
Figure 4.40.
Figure 4.40 Trigger In Activated
Trigger Output
Tab
Trigger outputs may be configured for all tests, except Continuity,
Self-Diag., Capacitance and Slow Close, using the
Trigger Output tab
(Figure 4.41) for the test being run. When this tab is selected, the Trigger
State is set to Off , which deactivates the output triggers from the Virtual
Front Panel. This also occurs when the Trigger In is set to Aux Contact
(Figure 4.42).
Trigger
Indicator