doble TDR9000, User Manual, Page: 146 / 454

Configuring Test Plans
4-48 72A-1898 Rev. A 11/01
Monday
, November 26, 2001 1:09 pm
To access this window:
• Click any motion connector or motion channel label, for
example, TRAVEL1 , as shown in Figure 4.22 on page 4-46.
The window shown in Figure 4.23 appears.
Figure 4.23 Motion Connector – Individual
The following items are configurable:
In use A checkbox that activates or deactivates the
associated channel.
Travel Label A field for entering the travel name associated with
the channel.
Velocity Label A field for entering the velocity name associated
with the channel.
Phase A scrollable picklist for selecting the phase
associated with the channel.
Configuring the
EHV Module Figure 4.24 and Figure 4.25 on page 4-51 show the EHV and the EHV
Connector windows, respectively.
The EHV window configures items specific to individual channels, as
well as items applicable to overall module interpretation.
To access this window:
• Click the EHV label on the top or bottom of the virtual module, as
shown in Figure 4.20 on page 4-44.
Figure 4.24 on page 4-49 shows three connectors with two contact
measurement channels each. EHV channels are generally activated by
breaker head or tank, or by module (three tanks, one each for phases A,
B, and C). As additional breaker modules are added, additional EHV
modules are activated. This group activation allows for easy activation of
the additional channels from the virtual interface.