Make sure that the first measurement
and the distance to be measured are at
right angle.Use the Minimum /
maximum function, as explained in
"Measuring -> Minimum / maximum
measurement".
Press this button once, the display
shows . The laser is switched on.
Aim at the upper point ( 1 ) and trigger
the measurement. After the first
measurement the value is adopted. The
result is displayed in the summary line,
the partial results in the secondary line.
( e.g. Angle and Hypotenuse distance )
Press and hold down this button to
trigger continuous measurement, sweep
the laser back and forth, up and down
Indirect measurement -
determining a distance using 2
auxiliary measurements
e.g. for measuring building heights. It is
helpful to use a tripod.
If the angle is above
45°
, it need to
measure point ( 2 ) . Press
to switch off
the angle sensor, then must measure the
distance of point ( 1 ). Keep the
instrument as horizontal as possible
during the measuring.
勾股
测量
=
设置
测量
26
EN
Function
MEASURE
MEASURE
=
MENU