Dobinsons Springs and Suspension
surface to mark the cutting line. This does not
have to be exact.
13.
Align the template onto the bumper, aligning
the wheel arch edge, the top edge and then
carefully hold the template down against the
bumper, keep it straight and align the
template to the bumper fold edge and also
align the inner bottom corner with the top of
the recess in the bumper.
14.
Tape the template down, mark the cut edge
and remove the template.
15.
Flip the template upside down and mark the
other side.
16.
Mask a line across the bumper from the
bottom cut edge on each side (at the top of
the fog light recess) across the centre of the
bumper across the top of the registration
number plate screw clips.
Summary of Contents for BU59-3545
Page 10: ......
