手柄关机状态下，同时按住
Y
加
HOME
键开机，
4
个
LED
为流水灯状态，连接成功对应的通道指示灯常亮。
When the handle is turned off, press and hold Y + HOME key to turn on, 4 LED are flicking constantly, the
corresponding channel indicator lamp is always on.
5
、
Switch
手柄
Sensor
的校准
5. Sensor calibration of Switch handle
出厂校准：手柄关机状态下：① 按
B
加减号键
+Home
开机，
4
个
LED
分成
2
组，交替闪烁； ② 将手柄放置于水平
桌面，然后按加号键开始出厂校准，
3s
内自动完成。
Factory calibration: When the handle is off:1.press B plus minus key and Home to turn on, 4 LED are divided into 2
groups, alternately flickering;2. Place the handle on the horizontal desktop and press the plus key to start the factory
calibration within 3 s
主机对
sensors
的校准：①手柄连上主机后，放置于水平桌面；②主机进入
System Setting->Controllers and
Sensors->Calibrate Motion Controls,
长按手柄的
“+”
或者
“-”
号键开始校准。
Sensors calibration by host:(1) After the handle is connected to the host computer, it is placed on the horizontal desktop;2
Host enters System Setting- > Controllers and Sensor-> Calibrate Motion Controls. Long press the "+" or "-" keys of the
handle to begin calibration.
手柄安卓模式配对安卓主机：
The handle Android mode matches the Android host:
6
、同时按住
B
键加
HOME
键
3S, LED1
快闪过入蓝牙配对模式
,
搜索设备名
Gamepad
，点击设
Gamepad
蓝牙设备名连
接，蓝牙配对连接上后，
LED1
指示灯常亮，此时为
Gamepad
模式。
6. press and hold B key and HOME key for 3S, LED1 flashes with Bluetooth pairing mode, search device named
Gamepad, click to set the name of Gamepad Bluetooth device to connect. After pairing and connecting Bluetooth, the LED1
indicator lights on, and now it’s Gamepad mode.
7.
自动回连
7. Automatic reconnection
手柄关机状态下，按下
HOME
键
1
秒唤醒手柄，被唤醒后会自动连接与之配对的主机回连，
10
秒回连不成功则自
动休眠
;
其它按键无唤醒功能。
When the handle is turned off, press the HOME button for 1 second to wake up the handle, and automatically connect
with the matching host when awakened, and automatically sleep if backconnect fails for 10 seconds; Other buttons have no
wake-up function.
8
、手柄关机与休眠
8. The handle shuts down and sleeps
长按
Home
键
5s
可以关闭手柄；
Long press Home key for 5s can close handle;
手柄连接成功后，
5min
不操作，会自动进入休眠状态；
If the handle is not operated for 5 minutes after successful connection, it will automatically enter the dormant state.
主机屏幕关闭
,
手柄自动休眠
Host screen shuts down, handle automatically dormant
9
、低电压报警及充电
9. Low voltage alarm and charging
如果锂电池电压低于
3.55V±0.1V
则手柄上的充电指示灯快速闪烁，表示手柄电池低电压报警，灯快闪提示电压低；
此时插入
USB
充电线给手柄充电，充电时，手柄上的红色灯亮，充饱后熄灭。
If the voltage of the lithium battery is less than 3.55V + 0.1V, the charging indicator on the handle flashes quickly,
