Introduction
Be familiar with the product before using it for the first time. Please read the follo-
wing operating instructions and the safety instructions carefully. Use the product only
as described and for the specified application areas. Keep these instructions. Hand
over all documents when passing the product on to third parties.
Intended Use
This product is only suitable for the feeding of pets for private use. The product is not
intended for commercial use.
General safety instructions
Damages caused by non-observance of these operating instructions will void the
guarantee claim! No liability is assumed for consequential damages! No liability is
accepted for damage to property or personal injury caused by improper handling or
neglecting the safety instructions!
Contents of Package
Your Automatic Pet Water-bowl comes with the pump and filter pre-installed. There
are parts which need to be installed before use. The package is made up of two main
groups, 1) the base, 2) the output disc.
a. Water-bowl base
b. Water output disc
c. Filter cartridge
d. Holder of pump
e. AC/AC power adaptor
f.
Aerating water pump
Assembling your Pet Water-Bowl
1. Plug the pump (f) in the pin of the disc (b), place the holder(d) in the other pin
and screwing tight the screw.
2. Place the LED in the slot then screwing tight the screw to hold the cable.
3. Insert the charcoal filter-cartridge (c) into the slots as show.
4. Place the cable into the slot of the bowl.
Instruction Manual
50135 Automatic Aerating Pet Water-Bowl
