Recording a Voice Message to be played at feeding times
1. Press and hold the
REC
key, the Red LED will turn on
2. Speak your message. You have up to 6 seconds
3. When finished, release the
REC
key
Playing back recorded Voice Message
1. Press the
PLAY
key
2. Your recorded message will now play
3. At each Feeding your recorded message will play and repeat 3 times
Feeding Alarm
1. Your PF-20 Automatic Pet Feeder has an ALARM (a continuous beeping) to
alert you to when your feeding schedule has ended and no more food will be
dispensed
2. The Feeding Alarm will start at 6:00AM the next day to avoid disturbing anyone
during the night
3. You can press any key to stop the alarm
4. To restart your original feeding schedule, press the
START
key
Manually feeding your pet
Press the
SET
and
VOLUME
keys together, once.
Only ¼ cup (60cc) will be dispensed. The normal schedule and quantity will not be
affected
Important Notes:
a)
Power-on default settings are:
a)Number of Days to Feed=0 days (0=continuous),
b)Number of Feedings per Day=2 feedings and
c)Volume/Portion-size=1 (¼ Cup/60cc)
b) The feeder will
vibrate for about 15 seconds
during food delivery to
help the unit dispense food more efficiently
c) If you hear
a few beeps (10 in total) and the feeder-drum isn’t mo-
ving
then the
Tray-Full detector
has been triggered.
MAKE SURE THE FOOD SLIDE AREA IS CLEAR OF FOOD.
d)
Do not use the feeder under strong sun light
as the
Tray-Full
detector
can be activated by bright light making the feeder act like the
food-tray is full and stop delivering food
Opening and Closing the food cover
To open ( Unlock ) the food cover of your PF-20 Automatic Pet Feeder, rota-
te the round dial so the
ARROW
points towards the
Open Lock
To close ( Lock ) the food cover of your PF-10 Automatic Pet Feeder, rotate
the round dial so the
ARROW
points towards the
Closed Lock
Care and Cleaning
When the food tank starts getting dirty and there is a lot of loose food at the bottom
of the food tank, you can remove the food cover and food tank for cleaning.
Use a soft damp cloth to clean the feeder base which contains the control panel and
batteries. Never get this part wet and do
NOT
wash with running water.
You can wash the Food Cover and Food Tank in warm soapy water.
DO NOT put these parts in the dishwasher or they will
be permanently damaged !!!
FAQ & Troubleshooting:
1. The clock can display in 12 or 24-hour format
The
( PM )
icon will show in the afternoon under the 12-hour display format
2. The feeding-days can be changed at any time but the previous schedule will be
replaced and the new schedule will start from the 1st new feeding day you set
3. The feeding-times and feeding-volume can be changed at any time and the new
settings will be for the rest of the feeding schedule
4. Once the schedule has started, the
DAYS
displayed will be reduced by 1 every
day at 0:00 (midnight) until the end is reached. It will then revert back to the
original number of set
DAYS
and the Feed Alarm will sound. Just press the
START
key to start your original program/settings again
5. If the timer-icon is
OFF
and all numbers are flashing then no feeding schedule
has been set
6. When the timer icon is
ON
and all numbers on the LCD display are not flashing
then the schedule has started
7. When the Clock icon is
ON
the current time is displayed
8. When the
Red (LOW BATT) light FLASHES
, the batteries are low and must be
replaced
Change all the batteries as soon as possible. You will have to repro-
gram all your settings again when the batteries are changed
9. When the LCD display shows
( Err )
, the food doors are not closing properly. You
need to clean and remove any food
that jams the food doors.
1) Switch
OFF
the Auto Feeder, remove all food, turn your Auto Feeder upside
down
2) Clean both door hinges with a soft brush, like an old tooth brush
3) Manually open and close the doors, making sure they move smoothly. Make
sure both doors can hit the switch lever as shown in the photo below:
4) After cleaning switch ON the Auto Feeder and refill with food
Note: You will have to reprogram all your original settings
before you can use your feeder again
10. Always use the Quick Setup Guide for fast easy programming. If you want more
advanced features, use the comprehensive Instruction Manual
