7
QW410
QW410
Replacing the Printer Ribbon
1.
Press the button on the top of the printer to open the ribbon
compartment.
2.
If an existing ribbon is in
place, remove the ribbon
and discard it.
3.
Orient the new ribbon so
that the supply side (larger
side) is towards you and the
take-up side (smaller side) is
towards the back of the
printer.
4.
Align the left sides of the ribbon with the grooves and then lower
the right sides of the ribbons until they click into place.
PLACE THIS
SIDE FIRST
PLACE THIS SIDE
SECOND
5.
Remove any slack from the ribbon by rotating the ribbon
towards the supply side.
6.
Close the ribbon compartment.
SUPPLY
TAKE-UP