DNP IDW520, Quick Start Manual

Page: 6 / 16

6
IDW520 Photo ID System
Install the Ink Ribbon
• Orient the Ribbon . Orient the new ink ribbon so that
the supply side (larger side with yellow spool end) is
towards you, and the take-up spool (smaller side with
white spool ends) is towards the back of the printer.
• Place the ribbon in the printer . Place the left sides
of the ribbons onto the printer flanges one at a time.
Press the right sides of the ribbons into their holders until they click into
place. Remove any slack from the ribbon by rotating the ribbon towards
the supply side. Close the ribbon compartment.
NOTE: The yellow ribbon flange is inserted into the yellow holder.
•
Wait for the blank prints.
With the printer turned ON, the printer will
initialize and eject 3 blanks sheets of paper. The Power / Ready light
will remain lit. The printer is ready to print. If the error light remains lit,
recheck that the paper and ribbon are loaded correctly.
• Install the paper tray. The paper tray can hold up to 20 prints. However,
it is recommended that prints are removed from the tray at regular
intervals to prevent paper jams.
SUPPLY
TAKE-UP
PLACE THIS SIDE
FIRST
PLACE THIS SIDE
SECOND