10
4000CL-O, 400 Clip Fast Access System, Odetics Protocol
b.
VIEW
THE
IN
(OUT)
POINT
1)
When the IN (OUT) indicator is on, Press [
IN
] ([
OUT
]) to view the existing IN
(OUT) Point.
2)
While viewing the IN (OUT) Point:
Press [
MARK
] to overwrite the saved time with the current time.
Press
[
RECUE
] to search to the IN (OUT) point.
c. CLEARING
AN
IN
(OUT)
POINT
Press and hold [
DEL
] then press and release [
IN
] ([
OUT
]). The IN (OUT) indicator
turns off.
d.
ENTER
PREROLL
VALUE
1)
Press [
MENU
] and turn the Wheel to “Enter PREROLL:”
2)
Enter the desired preroll value using the ST300’s numeric keypad.
3)
Press [
ENTER
] to save the entered value
OR
[
ESC
] to exit without saving.
e.
EXECUTE
CAPTURE
FUNCTION
1) Press
VTR[
2
], VTR[
3
], or VTR [
4
] to select the source VTR.
2)
Press [
SHIFT
] + [
RECORD
]. The display will prompt you for a CLIP ID. A
default CLIP ID will be shown.
3)
Press
[
LOAD
] to accept the default CLIP ID
OR
Use [
NEXT CUE
], [
LAST CUE
] and Wheel to edit the CLIP ID. Use the
[
NEXT CUE
] and [
LAST CUE
] keys to position the cursor. Turn the Wheel to
select the desired letter.
OR
Manually enter a numeric ID using the numeric key pad.
Press [
LOAD
] to accept the CLIP ID. The ST300 will create the new CLIP ID
on the Video Server.
The Source VTR will preroll to the IN Point, then play. At the source VTR’s IN
point, the RECORDER will go into record.
At the Source VTR’s OUT point, the RECORDER will terminate record, post-
roll for 2 seconds, then stop.
The Source VTR will search to the OUT point and stop. The OUT point will be
cleared. The IN indicator will stay on. The OUT indicator will turn off.