Removing a U522 PCI Card
2-12
U522 Ethernet PCI Card Installation Guide (MAN0063)
C A U T I O N
To avoid damaging the PCI card, store it in a
static-protective envelope.
9. Store the PCI card in a static-protective envelope. If you are replacing the PCI card
with a new card, see the ‘‘Installing a U522 PCI Card” section in this chapter now.
If not, see step 8.
10. Install the filler panel that covers the opening in the rear of the card cage frame.
Then, close the retainer bar that secures the PCI card to the card cage frame and
tighten the thumbscrews (Figure 2-7).
11. Enable the PCI card. See
HP-UX Operating System: Fault Tolerant System
Administration (MAN0004) for more information.
12. Close the card cage door. When you close the door, power is restored to the card
cage.
