Dnake E416, User Manual, Page: 21 / 35

17
WEB SETTING
Connect Indoor Monitor and PC to a network switch in the same LAN. You can
enter the IP address of Indoor Monitor in the web browser search bar and log in
with the default account (admin) and password (123456). This is where you can
configure the device.
To get the IP address, you can search by DNAKE Remote Upgrade Tool installed
in the same LAN with the devices.
1. Main
When you first log in to the web interface, you can find basic information
displayed in this dashboard.
Framework: Framework of the device;
Voip: Firmware version of the device;
SIP: Status of SIP registration of the device;
2. Network
The device network can be set to either DHCP or a static IP address.